EasyManua.ls Logo

Asus VG236H - Troubleshooting (FAQ)

Asus VG236H
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter3:GeneralInstruction3-5
3.3 Troubleshooting (FAQ)
Problem Possible Solution
PowerLEDisnotON
• Press the button to check if the monitor
isintheONmode.
• Checkifthepowercordisproperly
connected to the monitor and the power
outlet.
ThepowerLEDlightsamberandthereisno
screen image
• Check if the monitor and the computer are
intheONmode.
• Makesurethesignalcableisproperly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
isproperlyworking.
Screenimageistoolightordark • Adjust the Contrast and Brightness
settingsviaOSD.
Screenimagebouncesorawavepatternis
present in the image
• Makesurethesignalcableisproperly
connected to the monitor and the
computer.
• Moveelectricaldevicesthatmaycause
electrical interference.
Screenimagehascolordefects(whitedoes
notlookwhite)
• Inspect the signal cable and make sure
that none of the pins are bent.
• PerformResetviaOSD.
• AdjusttheR/G/Bcolorsettingsorselect
theColorTemperatureviaOSD.
3Dfunctionisnotwellworking • Makesurethebundleddual-linkDVIcable
isproperlyconnectedtothemonitoranda
compatibleNVIDIA-GPUgraphicscard.
• MakesuretheNVIDIA®3Dglassesand
IRemitterareproperlyconnectedtothe
computerviaUSBcables.
• Make sure the computer was installed with
Microsoft® Windows Vista or Windows 7
operatingsystem,andrequiredNVIDIA
3Ddrivers.
• Make sure screen resolution setting is
1920x1080at120Hz,110Hzor100Hz.
• VisitNVIDIAwebsite(http://www.nvidia.
com/)formoreinformationaboutsystem
requirements,setupinstructions,andPC
games supported.

Related product manuals