Asus VT168HR Series - Assembling the Monitor Base; Connecting Cables

1-2
Chapter 1: Product Introduction
1.3 Assembling the monitor base
To assemble the monitor base:
1. Placethedisplayonaclothonthetable.Thenattachthebasetothe
armandxwiththescrewtojointhemtightly.Youcaneasilytighten
thescrewbyngers.
2. Adjustthemonitortotheanglethatismostcomfortableforyou.
Werecommendthatyoucoverthetablesurfacewithsoftclothto
preventdamagetothemonitor.
1
2
*Basescrewsize
：
M6x13mm
1.4 Connecting cables
To connect cables:
Connectthecablesyouneedbasedonchapter1.5.2,page1-4.