Asus VY279HF Series - Monitor Installation Steps; Connecting Signal and Power

1-4
Chapter 1: Product Introduction
Installaion
1. Turnoffyourcomputerandunplugyourcomputer'spowercord.
2. ConnectthesignalcabletotheHDMIinputsocketofthemonitor,and
theHDMIoutputsocketofthegraphicscardonthecomputer.Then
tighten the thumbscrews on the signal cable connector.
3. Insertthemonitorpowercableintothepowerportatthebackofthe
monitor.
4. Plugthepowercordsofyourcomputerandyourmonitorintoa
nearbyelectricaloutlet.
A
B
C
2
AC IN
HDMI