Asus VZ249HE - Page 20

3-6
Chapter 3: General Instruction
Image
Back
Standard Mode VGA 1920 x 1080 @ 60Hz
VZ249
Focus
Auto Adjust
(Page 2/2)
• Sharpness: Adjust the picture sharpness. The adjusting range
is from 0 to 100.
• Trace Free: Speed up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or
“OverScan”.
• 4:3 is only available when the input source is in 4:3 format.
• OverScan is only available for HDMI input.
• VividPixel: ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjustingrangeisfrom0~100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Adaptive-Sync (for VZ249Q model only): Select ON or OFF to
enable or disable the dynamic refresh rate range from 40Hz to
60Hz through DisplayPort stream 1.2.
• Position: Adjust the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
• More (for VZ249Q model only): Return the next page of Image
Setting.
• Back (for VZ249Q model only): Return the previous page of
Image Setting.