7.17 Air Cleaner Service
To service the air cleaner:
1. Shut the machine down as described in section 5.13, then open the hood to
access the air cleaner assembly.
2. Release the latches on either side of the air cleaner housing, then remove
the cover to expose the primary filter for service.
3. Immediately vacuum the inside of the canister to remove loose dirt.
4. Once any dirt particles have been removed, slowly remove the primary
element (1) taking care not to disturb dirt that may be caked around the
filter seal. Again vacuum the canister.
5. Remove the secondary element (2) at this time, taking care not to disturb
dirt that may be caked around the filter seal. Again vacuum the canister.
6. Wipe the seal areas with a clean damp cloth to remove any remaining dirt.
7. Reverse steps 1, 2, 4 and 5 to install new filter elements prior to resuming
operation.
7 MAINTENANCE
75
RT-60/R160T/R190T ROW O&M
0404-659 2016-05
Do not clean the filter elements. Instead, replace the filter elements when
soiled or damaged to comply with engine warranty requirements and to pro-
long engine life.
NOTICE
To Next Page
Loading...
