async A1 - 1.6 CHARGING AND REMOVAL OF BATTERY

18
1.6 CHARGING AND REMOVAL OF BATTERY
1.6.1 REMOVAL OF BATTERY
Make sure that the bike is standing securely before removing either
the seat or the batte pack. Also, make sure that the bike is
powered-o. There are two ways to remove the batte (handle
with care):
1. Open the taillight cover.
A.Open with buttons: After congure the electric lock on Asyncbike
app. Long press"-"/unlock button （Based on your model）on the
combination button panel to open the taillight cover (ensure that
the vehicle is powered on).
B. Use the key: use the key on the vehicle to open the taillight cover
(turn the key clockwise). Bear in mind that this method of unlocking
only available before you congured the electric lock on Asyncbike
app.
2. Press and hold the power plug locking button while pulling out
the power plug (handle with care).
3.Pull the batte out of the batte compament along the slide.
Due to the large weight of the batte, it needs to be placed
horizontally on a at and d suace (with the logo side facing up)
after being taken out. Ensure the batte is in a secure place.