28
8. BRAKE OPERATION
9. BICYCLE CARE
your brakes earlier and more gradually than you would under normal,
d conditions.
The e-bike is equipped with front and rear disc brakes. Their main
function is to slow down or to stop the bicycle. NOTE: Apply the rear
brake before using the front brake in low-traction conditions.
- The brake on the front wheel is controlled by the lever on the
left-hand side of the handlebar. ·The brake on the rear wheel is
controlled by the lever on the right-hand side of the handlebar.
·The front brake provides the majority of the e-bike's stopping power.
-When slowing down on slippe suaces, use the rear brake rst
before applying the front brake. Be sure all the items you installed are
properly torqued, tightened, and connected.
-A signal wire from each brake lever automatically turns o the motor
when either brake is being used. This feature prevents undue wear on
the electric motor and batte. (For NAVersion)
Remove the batte from the bike before doing any bike maintenance
or cleaning.
The bike is not approved for steam cleaning, high-pressure cleaning,
or cleaning with a water hose. Clean the bike using a moist rag.
We recommend regular maintenance be carried out once a year or 800
To Next Page
Loading...