18 Instructions BS5 User Manual v2.0
This default program will read once an hour.
See the GP2 User Manual or online Help for further help.
Specification
For a comprehensive specification see Climatronics User Manual
Recalibration Period
“These sensors do not have a shelf life. The calibration performed on
them in 2011 is still good today if they have not been in use. The sensor
calibration is good until 1 year of use in the field”.
(Climatornics email received 17/4/2015)
The Climatronics Manual itself p11 says:
“6.0 Calibration
Calibration is performed against a NIST traceable standard. The
calibration coefficients are stored in non-volatile memory at the factory.
No user calibration is available. The sensor must be returned to
Climatronics if periodic calibration is desired.
7.0 Maintenance
Periodic cleaning of the sintered filter on the bottom of the unit may be
required in dusty conditions. Remove the filter from the bottom of the unit
and clean with distilled water.
Return of the sensor to Climatronics for a yearly recalibration is
recommended.”
Appendix
Climatronics M102663 User Manual (available from
www.climatronics.com)
Copyright - All rights reserved. Under the copyright laws, this manual may
not be copied, in whole or in part, without the written consent of
Climatronics Corp. Under the law, copying includes translation into
another language.
To Next Page
Loading...