ATAG A-Serie
15
These operating instructions describe the func-
tioning and the operating of the ATAG A boilers.
This manual is for the end user. For installation
and servicing there is an installation & servicing
instructions manual for the installer.
Read this manual fully before operating the boiler.
In case of doubt or errors contact your installer.
ATAG Heating reserves the right to change the
specications and dimensions without prior notice.
Work on the boiler must be carried out by a com-
petent person, (Ref: Gas Safe Register) using
correctly calibrated instruments with current test
certication.
When replacing parts use only ATAG Service parts.
Contact details for ATAG Heating UK Ltd can be
found on page 25 of this manual.
1 Introduction
To Next Page
Loading...
Need help?
General
