ATAG A-Serie
20
Press + or - of the key;
The display will show the set value while ashing;
Press + or – to change the set value.
Each change becomes active directly.
Hot water program OFF:
Press – until the lowest value is reached and then
press – again.
The display is showing -- and the upper is off.
Switching on works in reverse order.
Press + or - of the
key;
The display will show the set value while ashing;
Press + or – to change the set value.
Each change becomes active directly.
Heating program OFF:
Press – until the lowest value is reached and then
press – again.
The display is showing -- and the upper is off.
Switching on works in reverse order.
Briey press the i-button or scroll button to obtain
the following values:
A0 = Supply water temperature
A1 = Return water temperature
A2 = Hot water temperature
A4 = Flue gas temperature
(Only if a ue gas sensor is connected)
A5 = Outside temperature
(Only if an outside sensor is connected)
A6 = Water pressure
A9 = Rpms of fan
To return to the standard view press ESC.
4.2 Setting the hot water temperature
4.3 Setting the heating water temperature
4.4 Requesting current data
Unit 3A, Thornton Road Ind. Estate Off Hockney Road Bradford, BD8 9HQ
01274 488 388
www.heatingspares247.com
To Next Page
Loading...
Need help?
General
