EasyManuals Logo
Home>Atag>Oven>CS4574M1C

Atag CS4574M1C User Manual

Atag CS4574M1C
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
EN 22
USE
Filling the water reservoir
Always fill the reservoir with clean and cold tap water, bottled water
without added minerals or distilled water suitable for consumption.
10 15
10 10 2015
10 15
10 10 2015
10 15
10 10 2015
1. Press the ‘water reservoir’ button to open the water reservoir cover.
2. Use the handle to remove the reservoir from the oven.
3. Remove the water reservoir lid and clean the water reservoir with
clean water.
4. Fill the reservoir with water up to the ‘MAX’ mark on the reservoir
(around 1.2 litres).
5. Push the water reservoir back in the oven until a click is heard
(position switch is activated).
6. Close the water reservoir cover.
Any water remaining in the steam system after cooking will be pumped
back into the water reservoir. Empty, clean and dry the water reservoir.
Only fill the reservoir just prior to using it!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag CS4574M1C and is the answer not in the manual?

Atag CS4574M1C Specifications

General IconGeneral
BrandAtag
ModelCS4574M1C
CategoryOven
LanguageEnglish

Related product manuals