EN 34
USE
Function Description
Steam clean
• With this function and a damp cloth, you can
easily remove grease and dirt from the oven walls.
• Use this function only when the oven has cooled
down fully. Steam is sprayed into the oven cavity
at regular intervals.
• After soaking, food residues can be removed
using a damp cloth.
Culisensor
Roasting with the culisensor
For roasting with the culisensor, set the desired core temperature of the
dish. The oven will heat up until the dish’s core temperature is reached.
The culisensor measures the core temperature of the dish.
1. Switch on the oven using the ‘On/Off’ button.
2. Remove the rubber cap from the connection point (front top corner
of the right side wall).
3. Put the culisensor plug in the connection and insert the culisensor
completely into the food.
To Next Page
Loading...
Need help?
General
