EN 41
USING THE AUTOMATIC MENU SETTINGS
Vegetable menu setting
Add 30 - 45ml of cold water for every 250g, unless a dierent amount of water is
recommended (see table)� Cover the vegetables for the minimum time (see table)� Continue
cooking until you have the desired results� Stir the vegetables during and after cooking� After
cooking the dish, add salt, herbs or butter� Cover the dish and allow this to stand for 3minutes�
Cut fresh vegetables into pieces of equal size� The smaller they are, the faster they will cook�
Selecting the vegetable menu function
Press the function selection button ten
times to select the vegetable menu
setting� The ‘vegetable menu setting’
symbol lights up in the display.
Press the settings buttons to set the
desired vegetable menu function�
Press the selection button�
Press the settings buttons to set the
desired weight�
If you do not select a weight, a weight
is set automatically after 5seconds.
Press START to start cooking�
1 2
3 4
To Next Page
Loading...
Need help?
General
