Atag i24C Installation & Servicing Instructions

Installation & Servicing instructions ATAG iC-Range
43
12.3.1 Always Active
To enable the Always Active comfort mode setting, follow the steps below.
1 From the controller Home screen, press OK.
2 Turn the selector wheel to highlight Complete Menu.
Press OK.
3 Turn the selector wheel to highlight DHW Settings.
Press OK.
4 Turn the selector wheel to highlight Comfort function.
Press OK.
5 Turn the selector wheel to highlight Always Active.
Press OK.
7 The message in the screen left appears.
The Always Active comfort mode is now selected.

Atag i24C Specifications

General

Brand	Atag
Model	i24C
Category	Boiler
Language	English