7
Take note of the following when maintenance or adjustments are needed:
- The boiler must be able to function during these activities; for this reason, the boiler’s 230V power supply,
gas pressure and water pressure must be maintained. Ensure that there is not a source of potential
danger during these activities.
Following maintenance or other activities; always check the installation of all parts through which
The following (safety) symbols may be encountered in these installation instructions and on the boiler
(packaging):
Boiler must be stored away from frost.
transport.
Protect the boiler from weather conditions during transport and storage whilst still in its packaging.
If and how to clamp when using transport trucks with clamp equipment.
If and how to transport when using a rolling jack.
The whole packaging is made of recycled materials and can be recycled again.
Transport and place the boiler in its packaging in this position.
Do not to step on or stand on the package.
An assembly or dismantling must be carried out.
Pay extra attention in connection with a particular operation.
Useful tip or advice
Disposal of the product
This product should be handed in at a designated collection point, e.g. by handing it in at a duly authorized
reseller when purchasing a similar product, or at an authorized collection site for recycling products wich
contains electrical and electronic equipment (EEE) and batteries and accumulators. Because of the
potentially hazardous substances that usually accompany EEE, improper handling of this type of waste could
have a possible impact on the environment and human health.
Your cooperation in the proper disposal of this product will contribute to the eective usage of natural
resources.
For more information on recycling this product, please contact your city oce, local waste disposal facilities,
ocial service for chemical waste or landll site.
To Next Page
Loading...
Need help?
General
