EasyManua.ls Logo

Atag KA8074K3C - Installation and Connection; Selecting the Location

Atag KA8074K3C
310 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Selecting the location
Place the appliance in a dry and well aired
room. The permitted ambient temperature
range for the appliance depends on the
appliances climate class, which is shown on
the type plate.
WARNING!
Do not place the appliance in a room where the temperature can fall below 5 °C: the appliance
may not work properly or become defective!
Relative humidityAmbient temperature range °CClassDescription
75%
+10 to +32SNExtended temperate
+16 to +32NTemperate
+16 to +38STSubtropical
+16 to +43TTropical
In environments with high humidity level, condensate droplets may appear on the appliances
exterior surfaces.
If the appliance is installed in a dry environment, we recommend to use humidity box included
in the appliance.
WARNING!
Install the appliance in a room with an adequate amount of air. There should be at least 1 m
3
of
air per every 8 grams of refrigerant. The amount of refrigerant is indicated on the rating plate
inside the appliance.
WARNING!
Do not place the appliance in a room where temperature can drop to below 5°C. In such
environment, the appliance may not operate correctly, or it may become defective.
WARNING!
The appliance is not suitable for outdoor use and it may not be exposed to rain.
10
Installation and connection

Table of Contents

Related product manuals