• Camera (switch ‘On’ or ‘Off’)
• Key lock automatic (how long to automatically activate the key lock)
• Use of Zone B (serving area or shelves)
• Humidity (it is possible to stop monitoring humidity and the humidity box refill notifications)
• Charcoal filters
- Countdown (‘Reset’ button must be pressed when charcoal filters are replaced)
- Notification (how long will the notification appear on the display before the expired date of
the filters).
• Appliance info (appliance name, AUID, MB sw version, UI sw version)
• Software update (‘Update’ button available if software update is available)
• Factory reset (reset button)
• Modes
- Eco mode (switch ‘On’ or ‘Off’)
- Sabbath mode (switch ‘On’ or ‘Off’)
- Demo mode (first switch ‘On’ or ‘Off’ to dis- or enable the appliance performance and use
for demonstration purposes, switch ‘On’ or ‘Off’ to add 10 virtual wines to the inventory)
Software Update
Wine Climate Cabinet can receive updates of the appliance software (for example improved function
updates or safety relevant updates). This requires that Wine Climate Cabinet is connected to the
cloud.
With ConnectLife Wine Climate Cabinet mobile application you can also receive notifications when
software updates are available in the appliance-but only when a user account is paired to the
appliance. If this is not yet established, please proceed with the chapter for Operation, Initial Use
(this can be done anytime through SETTINGS menu, not only during initial use).
When new software update is available, both appliance and mobile app will send a notification. In
the appliance, a pop up is displayed with a direct access to the update process. In the mobile app,
new application screen will appear with notification that new software update is available with direct
access to the update process. Please follow the instructions.
To start the update process, press on the “UPDATE” button in the Software Update screen (it is also
found inside SETTINGS menu).
During the update process the appliance cannot be used. Make sure the power supply and Wi-Fi
connection are not terminated. The update process may take a while. It is normal if there may be no
response during the update. The update process can take between 1-5 minutes. In some cases, if
there is bad network connection, this time can be longer. User can monitor update progress on
appliance’s display, download process is displayed in %.
INFORMATION!
With the software update also user interface can change, so user manuals may not reflect the
latest changes. For latest version of the user manuals please check your ConnectLife Wine
Climate Cabinet application.
47
Operation
To Next Page
Loading...
