• Functional mode;
- Shelf lights (temperature and intensity sliding percentage from 0 to 100)
- RGB lights (colour and intensity sliding percentage from 0 to 100)
- On for (how long for the cabinet to be lit in this mode)
PROXIMITY AND DOOR SENSOR:
You can set the following from this menu:
• Proximity sensor (switch ‘On’ or ‘Off’)
• On user presence;
- Display change to (none, clock screen or status screen)
- Light change to (none, ambient mode or functional mode)
• During door opening;
- Display change to (none, clock screen or status screen)
- Light change to (none, ambient mode or functional mode)
• After door closing;
- Display change to (none, clock screen or status screen)
- Light change to (none, ambient mode or functional mode)
NIGHT MODE:
You can set the following from this menu:
• Night mode (switch ‘On’ or ‘Off’)
• Start time (start time for the lower display brightness)
• Display dimming (display intensity sliding percentage from 0 to 100)
• Light dimming (lights in cabinet intensity sliding percentage from 0 to 100)
NETWORK CONNECTION:
You can set the following from this menu:
• Application download (QR code for application download)
• WLAN (switch ‘On’ or ‘Off’)
- Choose a network (select from list of available networks)
- Pairing (While in this menu pairing is enabled, QR code for pairing).
- Unpair all (activate to disconnect all paired user profiles from the appliance connected
services).
- Remote control (switch ‘On’ or ‘Off’)
SYSTEM:
You can set the following from this menu:
• Inventory management (generic or exact)
46
Operation
To Next Page
Loading...
