• To allow for adequate ventilation and
cooling of the appliance, there has to be
sufficient clearence behind the appliance
and on both sides as well (at least 50 mm).
Please, also observe the clearance
required to fully open the door in order to
allow pulling out the drawers and shelves
(see installation diagram).
• The appliance comes supplied with two
spacers that should be fitted in the slots
on the back of the appliance, one on either
side, near the bottom. The spacers ensure
adequate air circulation that is required for
correct appliance operation. The appliance
will operate normally without the spacers
in place; however, this could affect its
power consumption.
13
Installation and connection
To Next Page
Loading...
