Accessory drawer (14) is installed on the
full-extension telescopic rails. It uses the
push-to-open mechanism for opening. Press
on the closed drawer to fully open it. To close
the drawer, press again on its front side.
Wooden dividers in the drawer can be inserted
into the grooves to fit the accessories you are
storing (bottle opener, pourer/spout, wine
stoppers etc.).
The drawer can also be removed from the
appliance without removing the serving bottle
shelf from its rails. To do this, fully open the
drawer, lift it at the front (1) and pull it towards
you.
To replace the drawer, follow the same
procedure in the reverse order: push the
drawer along the rails to the hook (d) on the
back of the rails. When the drawer is blocked
on the rear side, lower it at the front so that the
grooves (a) can be placed over the hooks (c).
26
Description of the appliance
To Next Page
Loading...
