Camera
When the camera functionality is enabled, the
camera will only be activated when a "scan"
action is taking place. When the camera
functionality is disabled, wine data can only
be added manually.
1. Tap on the toggle switch to turn ‘On’ to
enable the camera.
2. Press on the ‘Confirm’ key to save and
continue.
Time Zone
Set the according Time Zone to your location.
Time and Date
If a network connection has not been
established you will need to set the current
date and time manually.
1. Tap on the arrows above and below the
hours and minutes to adjust these.
2. Press on the ‘Confirm’ key to save the time
and continue.
1. Tap on the arrows above and below the
day, month or year to adjust these.
2. Press on the ‘Confirm’ key to save the date
and continue.
38
Operation
To Next Page
Loading...
