Atag MadQ/2 - TIME-DATE Settings; Adjusting Time, Year, and Daylight Saving

Page GB-24
TTIIMMEE--DDAATTEE
mm
1188::4455
TTIIMMEE
mm
2255..0066
WWEE
DDAAYY--MMOONNTTHH
AAUUTTOO
SSOO--WWII
CCHHAANNGGEE
22000033
YYEEAARR
Time
Setting range:
0.00 to 24.00 h
Year
Setting range:
2001 to 2099
Day/month
Setting range: 01.01. to 31.12.
Weekday: Monday to Sunday automatic
Automatic change of daylight saving time (can only be accessed
with code 1234)
Setting range:
AUTO: the last Sunday in March and October
MANU: no time change
Entry :
The opposite time and calendar data are factory preset and
normally do not need to be corrected.
The internal pre-programmed calendar provides for an auto-
matic time change at the annually occurring change of day-
light saving time.
If required, the automatic change of daylight saving time can
be disabled.
Leap years have been integrated into the calendar.
TIME-DATE
Entry: see level synoptic page 14-15
Exit: Button
¢¢
or automatically after approx. 60
seconds
Change: Accept selected flashing value by pressing the
rotary pushbutton. Then correct and accept by
pressing the rotary pushbutton again.
first value
next value
next value
next value
GB
8A521100_GB.qxd 10.11.2004 12:05 Seite 24