Page GB-26
Entry :
SSYYSSTT
SSYYSSTTEEMM
m
NNLL
SSYYSSTT
PPAARRAAMMEETTEERR 0011
m
PP11
Parameter 1 - language selection
Setting range: NL = DUTCH GB = ENGLISH
F = FRENCH I = ITALIAN
Factory preset: GB
All information appearing on the display is available in the lan-
guages Dutch, English, French and Italian. The selected lan-
guage can be selected and accepted according to the above
assignment.
Parameter 2 - Timeprogram
Setting range: P1, P1-P3
Factory setting: P1
This parameter specifies the number of the enabled time pro-
grams. With setting P1 only one timeprogram is available, with
setvalue P1-P3 all three programs are cleared.
SSYYSSTT
SYSTEM
Application: Use of the instrument in the corresponding lan-
guage area
Application: Frequently changing timeprograms, e.g. shift
work with different working times
Note: Only accessible with code 1234.
Contents: General limitation parameters and specifications,
which refer to the respective heating system.
Entry: see level synoptic page 14-15
Exit: Button
¢¢
or automatically after approx. 60
seconds
Change: Accept selected flashing parameter by pressing
the rotary pushbutton. Then change the parame-
ter value and accept by pressing the rotary push-
button again.
next parameter
next parameter
PPAARRAAMMEETTEERR 0022
GB
8A521100_GB.qxd 10.11.2004 12:05 Seite 26
To Next Page
Loading...