Page GB-40
Key for the emission measurement by autho-
rized person.
If this key is pressed, all heating and domestic hot water
circuits are regulated to their maximum temperature
settings.
The period of the emission measurement is limited to 20
minutes and can be activated again afterwards. The
time remaining for the measurement is shown in the
display.
The emission measurement can be stopped premature-
ly by pressing the key
¡¡
again.
Attention: The domestic hot water temperature rea-
ches the level of the set maximum dome-
stic hot water temperature. Danger of
scalding if set too high!
(for authorized installer)
-
772255
2200::0000
EEMMIISSSSIIOONN
°C
min
m
Remaining time
after activation
Current heat-
generator temperature
Stopping the emission measurement prematurely
!
Emission measurement
Special programs
GB
8A521100_GB.qxd 10.11.2004 12:05 Seite 40
To Next Page
Loading...