EasyManuals Logo

Atag SX3011C User Manual

Atag SX3011C
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
GB 18
how do you care for your oven?
maintenance
how do you care for your oven?
cleaning the gutter
Cavity (after each use)
Wipe the cavity with a dry cloth after the steam generator has cooled
or let the cavity air-dry by leaving the door open.
Water intake tube (once a month)
Remove the water intake tube by pulling it toward you.
Remove any hard-water deposits that may be inside (using a thin,
pointed object such as a thick skewer or a knitting needle).
Steam generator (once a month)
Pour 1/2 cup of white alcohol vinegar on the generator.
Let sit for a few minutes, then clean and rinse with water. Do not use
sponges or abrasive powders, nor coffee maker cleaning agents.
Remove this gutter by pulling it upward. Wipe it off and return it to
its position using the three notches provided.
The oven should not be cleaned with a steam cleaner.
The bulb is located at the back right of your oven's cavity.
Disconnect your oven before performing any task on the bulb
to avoid the risk of electric shock.
- Turn the view port a quarter turn to the left.
- Unscrew the bulb in the same direction.
Bulb characteristics:
- 15 W - 220-240 V
- 300°C - E 14 socket
- Replace the bulb then reposition the view port, making sure the
joints are correctly positioned.
- Reconnect your oven.
how do you change the bulb?

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag SX3011C and is the answer not in the manual?

Atag SX3011C Specifications

General IconGeneral
BrandAtag
ModelSX3011C
CategoryOven
LanguageEnglish

Related product manuals