Atag VA5113BT - Programmes

Indicators
Indicator Description
Drying phase indicator. It is on when you select a programme with the drying
phase. It flashes when the drying phase operates.
Salt indicator. It is on when the salt container needs refilling. It is always off
while the programme operates.
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. It is
always off while the programme operates.
PROGRAMMES
The order of the programmes in the table may not reflect their sequence on the control
panel.
Programme Type of load Degree of soil Programme phases
1)
• Crockery
• Cutlery
• Pots
• Pans
• Normal
• Lightly dried-on
• Prewash
• Wash 50 °C
• Intermediate rinse
• Final rinse 60 °C
• Drying
• AirDry
• Crockery
• Cutlery
• Pots
• Pans
• Normal to
heavy
• Dried-on
• Prewash
• Wash 60 °C
• Intermediate rinse
• Final rinse 60 °C
• Drying
• AirDry
• Crockery
• Cutlery
• Pots
• Pans
• Normal
• Lightly dried-on
• Wash 60 °C
• Intermediate rinse
• Final rinse 55 °C
• Drying
• AirDry
• Crockery
• Cutlery
• Fresh • Wash 50 °C
• Intermediate rinse
• Final rinse 50 °C
• AirDry
2)
• All types of
loads
• All degrees of
soil
• Prewash
1)
This programme offers the most efficient use of water and energy consumption for crockery and cutlery with
normal soil. This is the standard programme for test institutes. This programme is used to assess compliance
with the Ecodesign Comission Regulation (EU) 2019/2022.
2)
With this programme, you can quickly rinse off food remains from dishes and prevent odours forming in the
appliance. Do not use detergent with this programme.
30