Atag VA2113RT - User Manual

Questions and Answers

S
Shannon BerryAug 21, 2025
How to fix not clean dishes in Atag Dishwasher?
- M
  Mr. David HermanAug 21, 2025
  If your Atag Dishwasher isn't cleaning dishes properly, start by checking the spray arms. Remove them and ensure they are clean and can rotate freely. Make sure the spray arm holes and bearings aren't blocked. Select a suitable dishwashing program, like the Intensive wash for very dirty dishes. Ensure you are using the correct detergent dosage based on your water hardness; too much or too little detergent can affect results. Also, check the detergent's expiration date. Load the dishes correctly, avoiding overcrowding. Make sure that the filter handle is locked in the stop position and that the drainage pump stop is in place.
M
mooreronaldAug 23, 2025
How to remove spots on stainless steel or silver in Atag VA2113RT?
- S
  sonya07Aug 23, 2025
  If your Atag Dishwasher leaves spots on stainless steel or silver items, it could be due to certain foods like mustard, mayonnaise, lemon, vinegar, salt, or dressings. Rinse these foods off dishes if you're not starting the dishwasher right away, and consider using the One hour program with the SpeedWash option. Also, prevent direct contact between different metals like silver, stainless steel, and aluminum to avoid marks and tarnishing.
D
dshahAug 26, 2025
What to do if Atag Dishwasher leaves spots or films on the dishes?
- T
  Todd MorenoAug 26, 2025
  If your Atag Dishwasher leaves spots or films on the dishes, the issue might be related to the water softener. Ensure the salt compartment lid is tightly closed. If the problem persists, it may require a service call. Check your water softener and rinse aid dosage settings. Make sure the salt compartment is full. If you're using 3-in-1 detergent, try inactivating the TAB setting and adding salt and rinse aid separately. If you notice etching on crystal, use a lower temperature and less detergent when washing crystal items.
R
Robert TaylorAug 28, 2025
How to improve drying in Atag VA2113RT?
- P
  Peter CummingsAug 28, 2025
  If your Atag Dishwasher isn't drying dishes well enough, first ensure that the Auto open option is activated. Make sure you fully load the dishwasher. Check and replenish the rinse aid, or increase its dosage. If you're using 3-in-1 detergent, try inactivating the TAB setting and adding salt and rinse aid separately.
M
Melissa WilsonAug 29, 2025
How to get rid of bad odour in Atag Dishwasher?
- A
  Allen GibbsAug 30, 2025
  If your Atag Dishwasher has a bad odor, clean around the seals and in the corners with a washing-up brush and a low-foaming cleaner. If you've been using low-temperature programs for a long time, run a higher temperature program about once a month or use the self-cleaning program.
B
ballsydneySep 1, 2025
How to remove grease deposits in Atag VA2113RT Dishwasher?
- R
  Robert MeyersSep 1, 2025
  If you notice grease deposits in your Atag Dishwasher, it's likely due to prolonged use of low-temperature programs. Try running a high-temperature program, like the Intensive wash, to dissolve the grease. Alternatively, you can use the self-cleaning program.
F
fosteraudreySep 3, 2025
How to solve sticky white/blue film on dishes in Atag Dishwasher?
- J
  jessicaramirezSep 3, 2025
  If your Atag Dishwasher leaves a sticky white/blue film on dishes, the rinse aid dosage setting is likely too high. Reduce the amount. If you have very soft water, consider diluting the rinse aid 50:50 with water.
A
Anne SmithSep 5, 2025
How to remove spots left after washing in Atag VA2113RT?
- S
  Sarah CastroSep 5, 2025
  If you're finding spots left after washing in your Atag Dishwasher, it could be due to lipstick or tea stains, which can be difficult to remove. Try using a detergent that contains a bleaching agent.
U
uparkerSep 7, 2025
Why there is detergent residue in Atag VA2113RT Dishwasher after dishwashing?
- A
  Andrew BrewerSep 7, 2025
  If you find detergent residue in the detergent compartment of your Atag Dishwasher after washing, it's likely because the compartment was damp when you added the detergent. Make sure the detergent compartment is dry before adding detergent.
A
Ashley TerrellSep 9, 2025
Why Atag VA2113RT Dishwasher buttons do not react?
- K
  Kurt VillegasSep 10, 2025
  If the buttons on your Atag Dishwasher aren't responding, it might be because you're pressing them too quickly after opening the door. Wait a moment and try again. Also, the buttons might be dirty, so clean them with a dry or slightly damp cloth. Ensure the door is open, as the buttons only work when the door is open.

Atag VA2113RT Specifications

General

Type	Freestanding
Number of place settings	13
Product Type	Dishwasher
Place Settings	13
Energy Efficiency Class	A++
Annual Energy Consumption	262 kWh
Noise Level	44 dB
Delay Start	Yes
Half Load Option	Yes
Water Pressure	0.03-1 MPa
Mains Voltage	220-240 V
Mains Frequency	50 Hz
Annual Water Consumption	2800 liters
Programs	Eco, Intensive, Quick