Atag VA2113RT - User Manual

Questions and Answers

J
Joshua HawkinsSep 10, 2025
Why my Atag VA2113RT Dishwasher does not start?
- S
  Sheri MitchellSep 12, 2025
  If your Atag Dishwasher isn't starting, several factors could be at play. First, ensure the door is completely closed and the door lock clicks into place. If it doesn't, open the door, then press and hold the Auto open button until it flashes, wait until it stops (about 60 seconds), and close the door again. Check the plug and the fuse/circuit breaker. Also, make sure the water tap is on. If you paused a running program, simply close the door and wait for the dishwasher to resume. For overflow/leaks, check the unit. If you hear a continuous whirring sound, turn off the water tap, pull out the plug, and call for service. Finally, check if the Delayed start option is enabled; if so, press and hold the main power switch to cancel it and restart the dishwasher.
K
Kyle GreenSep 12, 2025
How to close Atag VA2113RT door?
- I
  isabella22Sep 12, 2025
  If your Atag Dishwasher door won't close, first check that the baskets are correctly positioned horizontally. If the door lock isn't clicking into place, open the door, press and hold the button for the Auto open option until it flashes, wait until it stops (60 seconds), and then close the door again to see if the lock engages.
J
James HarrisSep 14, 2025
Why water remains in Atag VA2113RT?
- N
  ndodsonSep 14, 2025
  If there's water remaining in your Atag Dishwasher after a cycle, start by cleaning the coarse and fine filters. Ensure the filter handle is locked in the stop position. Check for debris in the drainage pump and make sure the drainage pump stop is in place. Inspect the drainage hose for kinks or blockages, ensuring it has an inner diameter of at least 14 mm where it connects to the sink unit's water trap.
L
lisaleSep 16, 2025
Why Atag Dishwasher makes rattling sound when dishwashing?
- M
  Mrs. Tammy PatelSep 16, 2025
  If you hear a rattling sound when your Atag Dishwasher is running, it could be that the dishes are not correctly placed or the spray arms are not rotating freely. Check that the dishes are securely placed and spin the spray arms to ensure they can rotate without obstruction.

Atag VA2113RT Specifications

General

Type	Freestanding
Number of place settings	13
Product Type	Dishwasher
Place Settings	13
Energy Efficiency Class	A++
Annual Energy Consumption	262 kWh
Noise Level	44 dB
Delay Start	Yes
Half Load Option	Yes
Water Pressure	0.03-1 MPa
Mains Voltage	220-240 V
Mains Frequency	50 Hz
Annual Water Consumption	2800 liters
Programs	Eco, Intensive, Quick