Atag VA6611NT - Installation Instructions

32
Installation
SAFETY INSTRUCTIONS:
1. It is important that you closely follow the
instructions provided here.
2. An incorrect or defective installation can lead
to higher consumption of energy, water and
dishwashing detergent, which can lead to
higher costs and poorer cleaning results.
3. Plumbing and electrical installations must be
carried out by qualied professionals.
4. Exercise caution during the installation! Wear
protective gloves! Always work in pairs!
5. The power socket must be tted outside the
cavity for the dishwasher to enable easy ac-
cess after installing the machine.
6. Always follow the applicable regulations for
water, drain and electrical connection.
7. A dishwasher tted with a wired plug must be
connected to an earthed socket.
Caution!
Turn o the water supply when installing the
dishwasher!
BEFORE STARTING THE INSTALLATION:
1. Connection to water supply:
• There must be a shut o valve on the water
supply pipe. The shut o valve should be in-
stalled in a location that is easily accessible so
that the water may be shut o in the event that
the dishwasher needs to be moved.
2. Installation advice:
• Cable holes for wires/cables need not be
larger than 40 mm.
• Do not attach the plastic feet if the installation
space is of minimum height.
Note:
Check that the tting and connection measure-
ments are correct.