24
Settings
Reprogramming
Some of the machine’s functions can be reprogrammed. You get into the machine’s change
program using the machine’s ordinary buttons as per the instructions below. The selection
will be retained until the next time you reset this function.
Even if the machine is turned o at the main switch or loses power for any other reason,
all selections registered before the interruption of power will be retained.
Child-safe button lock
You can prevent a child starting the machine by accident or changing the settings by programming
the machine with a button lock, which requires the Temperature and Drying buttons to be pressed
simultaneously to start up the machine. The button lock will automatically be reactivated after three
minutes.
1. Switch o the dishwasher with the main switch.
+ 2. Hold in the Temperature and Drying buttons while pressing the main
switch. The Temperature, Drying and start symbols will ash. Release
the Temperature and Drying buttons.
3. Press the Program button – when the Daily wash symbol is lit,
the button lock has been activated.
4. Then press the Start/Stop button to store the setting.
or Reset:
1. Switch o the dishwasher with the main switch.
+ 2. Hold in the Temperature and Drying buttons at the same time as
pressing the main switch.
3. Press the Program button – when the Daily wash symbol goes out
the button lock has been deactivated.
4. Then press the Start/Stop button to conrm the setting.
To Next Page
Loading...
