AT&T 1040 Quick Reference Guide

13
PROGRAM
(ENTER NUMBER)
PAUSE
One-touch storage
For more information about using the display
screen menus, see the Menu operation section of
your installation guide.
Use the following steps to program the one-touch
keys.
Press [ENTER]. The screen displays ONE TOUCH.
Press [ENTER].
Press [ ] or [ ] repeatedly until you see
PROGRAM.
Press [ENTER]. The screen includes (ENTER
NUMBER).
Use the dial pad to enter up to 24 digits.
-OR-
To copy the most recently dialed number
from redial, press [(AUTO) REDIAL]. Only the
last number dialed from this extension can
be copied to a one-touch location. The other
numbers on the redial list cannot be copied
to a one-touch location.
To erase the last digit, press [ ] to scroll to
DELETE CHAR, then press [ENTER].
To cancel programming, scroll to CANCEL
and then press [ENTER].
Press the desired one-touch key to store the
telephone number in the normal location.
-OR-
Press [LOWER], then the desired one-touch
key to store the telephone number in the lower
location.
1.
2.
3.
4.
5.
•
•
•
6.

AT&T 1040 Specifications

General

Type	Corded
Lines	1
Speakerphone	Yes
Caller ID	Yes
Call Waiting	Yes
Intercom	No
Expandable	No
Handset Locator	No
Redial	Yes
Volume Control	Yes
Power Source	AC Adapter