7
NOTE:
If SPEAKERPHONE
is selected in the
AUTOMATIC MODE
menu, pressing any
line key selects the
line and turns on
the speakerphone. If
HEADSET is selected in
the AUTOMATIC MODE
menu and a headset is
connected, pressing any
LINE key selects the
line and turns on the
headset.
Making and answering calls
This phone comes programmed to use line 1
(default prime line) for calls when you do not
press a line button. To change the prime line, see
the PRIME LINE section of your installation guide.
When you answer a call, the phone automatically
selects the ringing line.
This phone automatically makes and answers
calls in the mode (speakerphone or headset) you
programmed (see the AUTOMATIC MODE section
of your installation guide). Follow the directions
below to manually choose a mode. If the phone
is in use on one line, any other calls made or
answered use the same mode already in use.
To make a call:
Lift the handset or press [ SPEAKER] or
[HEADSET].
Dial a number.
Dial a phone number using the dial pad.
Dial the last number dialed from this
extension by pressing [(AUTO) REDIAL].
To answer a call, lift the handset or press
[ SPEAKER] or [HEADSET].
To hang up if the handset is not already on the
telephone base, place the handset on the base.
If you were using the speakerphone, press
[ SPEAKER]. If you were using the headset,
press [HEADSET].
To override the automatic line selection, press
the LINE button for the line you wish to select,
then lift the handset or press [ SPEAKER] or
[HEADSET].
•
1.
2.
–
–
•
•
•
To Next Page
Loading...
Need help?
General
