AT&T 1040 Quick Reference Guide

14
To dial a one-touch number
For more information about using the display
screen menus, see the Menu operation section of
your installation guide.
Use this feature to dial a one-touch number. The
one-touch preference is preset to INTERCOM.
NOTE: To change one-touch preference, see
PREFERENCE section of your installation guide.
If one-touch preference is set to INTERCOM:
Lift the handset.
-OR-
Press [ SPEAKER].
-OR-
Press [HEADSET] and listen for the dial tone.
Press the one-touch button.
-OR-
Press [LOWER], then press the one-touch
button for the number you want to call. The
screen displays the number as it is dialed.
If one-touch preference is set to TELEPHONE,
you do not need to go off hook and listen for a
dial tone before dialing a one-touch number. You
can simply:
Press the one-touch button.
-OR-
Press [LOWER], then press the one-touch
button for the desired number to call.
The screen displays the number as it is
dialed using the speakerphone or headset
as programmed for automatic mode. (See
AUTOMATIC MODE section of your installation
guide.)
1.
2.
•
•

AT&T 1040 Specifications

General

Type	Corded
Lines	1
Speakerphone	Yes
Caller ID	Yes
Call Waiting	Yes
Intercom	No
Expandable	No
Handset Locator	No
Redial	Yes
Volume Control	Yes
Power Source	AC Adapter