AT&T 1080 Quick Reference Guide

9
Call transfer
Blind transfer
Use this feature to make a blind transfer. While on
a call:
Press [TRANSFER]. The outside call is
automatically put on hold. TRANSFER LINE#Y
TO (with Y being the line in use) appears on the
third line of the display.
Press the one-touch button for the destination
extension.
-OR-
Dial the destination extension number to which
you’re transferring the call. The extension
number appears on the fourth line of the display.
Hang up.
Your phone reminds you with a double-beep
every 30 seconds when a transferred call has
not been answered.
NOTE: If you do not dial an extension within
10 seconds, the transfer automatically cancels. The
call is still on hold. Press the corresponding LINE
key to resume the call.
Transfer a call and speak to the receiving party
While on a call, press [INTERCOM]. The outside
call is automatically put on hold.
Press the one-touch button for the extension to
which you’re transferring the call.
-OR-
Dial the extension number to which you are
transferring the call. The extension number
appears on the third line of the display.
When the other party answers by pressing
[INTERCOM], you can announce the call.
Press [TRANSFER].
Hang up.
Answer a transferred call
When you hear a long transfer ring, pick up the
handset or press the LINE button of the call to use
the speakerphone or headset.
1.
2.
3.
4.
1.
2.
3.
4.
5.
10:01AM 11/23
00:30
10:01AM 11/23
00:30
TRANSFER LINE#1
TO
10:01AM 11/23
00:30
10:01AM 11/23
EXT 11
INTERCOM TO
PAGE
10:01AM 11/23
EXT 11
INTERCOM TO 12
10:01AM 11/23
EXT 11
TRANSFER LINE #1
TO 12
10:01AM 11/23
EXT 12
TRANSFER FROM 11
10:01AM 11/23
EXT 11
TRANSFER LINE #1
TO 12

AT&T 1080 Specifications

General

Brand	AT&T
Model	1080
Category	Telephone
Language	English