8
NOTE:
If SPEAKERPHONE
is selected in the
AUTOMATIC MODE
menu, pressing any
line key will select
the line and activate
the speakerphone. If
HEADSET is selected in
the AUTOMATIC MODE
menu and a headset is
connected, pressing any
LINE key will select the
line and activate the
headset.
Making and answering calls
This phone comes programmed to use line 1
(default prime line) for calls when you do not
press a line button. To change the prime line, see
the PRIME LINE section of your installation guide.
When you answer a call, the phone automatically
selects the ringing line.
This phone automatically makes and answers
calls in the mode (speakerphone or headset) you
programmed (see the AUTOMATIC MODE section
of your installation guide). Follow the directions
below to manually choose a mode. If the phone
is in use on one line, any other calls made or
answered use the same mode already in use.
To make a call:
Lift the handset or press [ SPEAKER] or
[HEADSET].
Dial a number.
Dial a phone number using the dial pad.
Dial the last number dialed from this
extension by pressing [(AUTO) REDIAL].
Dial a phone number from the call history
by pressing [CALL HISTORY], scrolling to
the right number, and pressing [ENTER]
twice.
Dial a phone number from the directory by
pressing [DIR], selecting VIEW ENTRIES,
and then scrolling to the right number, and
pressing [ENTER] twice.
To answer a call, lift the handset or press
[ SPEAKER] or [HEADSET].
To hang up if the handset is not already on the
telephone base, place the handset on the base.
If you were using the speakerphone, press
[ SPEAKER]. If you were using the headset,
press [HEADSET].
To override the automatic line selection,
press the LINE button for the line you wish to
select, then lift the handset or press
[ SPEAKER] or [HEADSET].
•
1.
2.
a.
b.
c.
d.
•
•
•
To Next Page
Loading...
