AT&T 1080 - One-Touch Storage

14
PROGRAM
(ENTER NUMBER)
PAUSE
One-touch storage
For more information about using the display
screen menus, see the Menu operation section of
your installation guide.
1.
Press [ENTER]. The screen displays ONE TOUCH.
2.
Press [ENTER].
3. Press
[ ] or [ ] repeatedly until you see
PROGRAM.
4. Press
[ENTER]. The screen displays (ENTER
NUMBER).
5. Use the dial pad to enter up to 24 digits.
-OR-
•
To copy the most recently dialed number
from redial, press [(AUTO) REDIAL]. You
can copy only the last number dialed from
this extension to a one-touch location.
You cannot copy the other numbers in the
redialed shack.
•
To erase the last digit, press [ ] to scroll to
DELETE CHAR, then press [ENTER].
-OR-
Press
[REMOVE].
•
To cancel programming, scroll to CANCEL
and then press [ENTER].
6. Press the desired one-touch key to store the
telephone number in the normal location.
-OR-
Press
[LOWER], then the desired one-touch
key to store the telephone number in the lower
location.