DIRECTORY OPERATION
33
TELEPHONE OPERATION
32
Remove a
directory entry
Scroll through
directory
entries
Edit directory
entries
Dial a
number from
the directory
Enter
characters
of directory
entries
Store a pause in a
directory number
Store a tone signal in
a directory number
Can also
be used to
store the
switchhook
flash needed
to activate
some custom
calling
services
Store names
and numbers
in the
directory
Enter
Directory
mode
Transfer a Call
You can transfer a call you answer to any other 964 phone. Once you
transfer a call, it can be picked up at any other 964 phone, not just at the
extension you called.
1 Press t.
2 Enter the extension number where you’re transferring the call.
3 Hang up.
Your phone reminds you with a double-beep every 30 seconds when a
transferred call has not been answered.
To answer a transferred call, pick up the handset or press the LINE
button of the call to use the speakerphone or headset. You will know an
incoming call is a transferred call by the distinctive long rings.
NOTE: If a transferred call is not picked up within three minutes, the
system will automatically disconnect the call.
To Next Page
Loading...
