Do you have a question about the AT&T Four-Line Intercom Speakerphone 955 and is the answer not in the manual?
Defines terms related to the telephone system and its features.
Lists system features, their functions, and available setting options with defaults.
Describes the meaning of different audible tones and ring patterns heard on the phone.
Instructions for physically installing the phone on a desk, table, or wall.
Explains the use of AUX jacks for connecting external devices like modems or fax machines.
Explains how to use the navigation buttons to enter and operate the programming mode for system features.
Instructions for setting display language, time/date, and extension number.
Configuration for ringers, line usage, prime line, dial mode, and flash time.
Settings for area codes, Centrex console, auto-mute, ring delay, and system reset.
Overview of phone buttons and steps for making/answering calls via handset, speaker, or headset.
Functions like call timer, privacy, Do Not Disturb, and line status lights.
Volume, redial, hold, line switching, mute, tone dialing, and conference calls.
Procedures for transferring calls and understanding low battery and other indicators.
Guides for storing, reviewing, editing, and removing speed dial numbers.
Instructions on how to initiate calls using the stored speed dial numbers.
Detailed guide for entering, viewing, and managing names and phone numbers in the directory.
How to dial from the directory, store special characters, and remove entries.
Explains intercom, page, page all, and conference call functions.
Steps for initiating and receiving intercom calls using handset or speakerphone.
Procedures for paging all phones, switching pages, and using room monitor.
Overview of Caller ID service, its requirements, and handling call waiting.
How to view, review, and interpret call list entries and message waiting indicators.
Removing calls, saving entries to directory, and resetting indicators.
Recommendations for connecting a fax machine, including line selection and ringer settings.
Solutions for problems with ringing, intercom signals, tone signals, power, display, and COVM indicators.
Explains how line groups work when combining multiple 955 phones.
Describes the use of the fourth line as a private line assigned to a single extension.
Checklist for Centrex setup and enabling the console phone.
Setting ring delays, answering delayed rings, and picking up other station lines.