AT&T Four-Line Intercom Speakerphone 955 User Manual

8
INSTALLATION
NOTE: If you are installing multiple phones in your 955 system,
you must install and program one set at a time. If more than one
extension is assigned the same extension number, a repeating short ring
(error ring) will sound at all extensions. Reassign extension numbers,
being sure that each extension has a different number from 11 to 22
(see “Assign an Extension Number to Your Phone” in SET UP SYSTEM
FEATURES).
Table/Desk Installation
1 Install one 9V battery.
• Press in on the tabs and remove the telephone base.
• Use a small Phillips head screwdriver to remove the screw
and open the battery door.
• Insert the 9V battery (included), and replace the screw to
close the battery door.
• Replace the telephone base.
NOTE: The battery retains telephone memory in the event of a power
failure. If power fails and a working battery is installed, this phone will
work only to dial and answer calls with the handset or headset. No other
features will work until power is restored.
955_00_1ATT CIB #change 10/24/02 9:48 AM Page 8

AT&T Four-Line Intercom Speakerphone 955 Specifications

General

Brand	AT&T
Model	Four-Line Intercom Speakerphone 955
Category	Telephone
Language	English