SET UP SYSTEM FEATURES
17
Turn COVM Indicator On or Off for Each Line
If you subscribe to Voice Mail service with your local telephone service
provider, turn the COVM indicator on to have the screen display the
appropriate line numbers when there are messages waiting. You can turn
the COVM indicator on or off for each line individually or for all lines at
once. If you do not subscribe to Voice Mail service, turn the COVM
indicator off for each line.
1 Press G.
2 Press - until the screen displays COVM ON/OFF, then press >.
3 Press - or + until the screen displays the desired line number,
then press >.
4 Press - or + to select the desired setting.
5 Press S to store your selection.
6 Repeat Steps 1-5 to change the indicator setting for additional
lines.
Turn the Ringer On or Off for Each Line
1 Press G.
2 Press - until the screen displays RINGER ON/OFF, then press >.
3 Press - or + until the screen displays the desired line number,
then press >.
4 Press - or + to select the desired setting.
5 Press S to store your selection.
6 Repeat Steps 1-5 to change the ringer setting for additional lines.
Select the Ringer Type
1 Press G.
2 Press - until the screen displays RINGER TYPE, then press >.
3 Press - or + to select the desired setting. You will hear a sample
of each ringer type as you move through the settings.
4 Press S to store your selection.
To Next Page
Loading...
