AT&T Four-Line Intercom Speakerphone 955 User Manual

SET UP SYSTEM FEATURES
15
Use the Navigation buttons to program or change the system features setup.
• Press G to enter the Programming mode. The screen displays:
NOTE: If you do not press a key to continue programming within
20 seconds, the system automatically exits the Programming mode.
• Press - or + repeatedly to move through the list of options.
• Press > to choose the option currently displayed.
• Press S to store your selections and return to the ‘home screen’
for the feature currently displayed.
You can set up one feature at a time or you can set up a feature and then
move on to set up another feature. After you change one feature, press
+ or - to select another feature. When you are finished with features
setup, press E to exit Programming mode.
NOTE: After a feature is successfully programmed, the system beeps
once. If the system beeps twice, repeat the steps to set up the feature.
Store your
selection and
move to next
feature
Scroll through
options
Confirm
option choice
Exit Programming
mode
Used when
resetting
features to
default settings
Enter
Programming
mode
Feature
Options
955_00_1ATT CIB #change 10/24/02 9:48 AM Page 15

AT&T Four-Line Intercom Speakerphone 955 Specifications

General

Brand	AT&T
Model	Four-Line Intercom Speakerphone 955
Category	Telephone
Language	English