DIRECTORY OPERATION
36
Reviewing Information Stored in the Directory
1 Enter the Directory mode.
2 Press + or - to scroll through the directory entries
— OR —
Repeatedly press the dial pad key that has the first character of
the entries you wish to review until the character you are looking
for is displayed. Then press + or - to move through the entries
beginning with this character.
For example, to find the entry you stored for Jim in a directory beginning
with an entry for “Aaron,” press -. The screen displays:
Then press the button for “J;” the screen displays:
NOTE: If there is no entry with the first letter “J,” the screen will display
No Entries for “J”.