8
Getting started
Telephone base and charger installation
Install the telephone base and charger, as shown below.
Telephone base installation
f Raise the antenna.
f Plug one end of the
telephone line cord
into the telephone
jack on the back of
the telephone base.
f Route the power
adapter cord
through this slot.
f Plug the small end of the
telephone base power adapter
into the power adapter jack on
the back of the telephone base.
f Plug the large end of
the telephone base
power adapter into
a power outlet not
controlled by a wall
switch.
f Plug the other end
of the telephone
line cord into a
telephone jack or a
DSL lter.
If you have DSL
high-speed Internet
service, a DSL lter (not
included) is required.
The DSL lter must
be plugged into the
telephone wall jack.
Telephone line cord
To Next Page
Loading...
Need help?
General
