12
Getting started
Set date/time
Aer you install your telephone or power returns
following a power outage, the handset will prompt
you to set the date and time. For instructions,
see Set date/time on page 16. To skip setting
the date and time, press OFF/CANCEL on the
handset.
Voice guide to set Smart call blocker and answering system
Aer you install your telephone for the rst time, the telephone
base will prompt if you want to set Smart call blocker and answering
system. Follow the voice guide to set or skip the settings.
Voice guide to set Smart call blocker
The telephone base announces, “Hello! This voice guide will assist
you with the basic setup of Smart call blocker...”.
With the voice guide, you can set your Smart call blocker:
f To screen calls with telephone numbers that are not saved in
your directory, allow list or star name list.
- OR -
f Do not screen calls, and allow all incoming calls to get through.
Listen to the instructions to set up your Smart call blocker.
Initial setups
Date: MM/DD/YY
ECO
Time: HH:MM -
-
ECO
To Next Page
Loading...
Need help?
General
