AT&T BL102 User Manual

Answering system
76
Answering system settings
Message alert tone
When the message alert tone is set to On, and there is at least one new
message, the telephone base beeps every 10 seconds. Unless you change it,
the message alert tone is set to o.
There is no audible alert at the handset.
To change the setting:
1. When the handset is in idle mode, press MENU/SELECT to
enter the main menu.
2. Press qCID or pDIR to scroll to Answering sys, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to Ans sys setup, then press
MENU/SELECT.
4. Press qCID or pDIR to scroll to Msg alert tone, then press
MENU/SELECT.
5. Press qCID or pDIR to choose On or Off.
6. Press MENU/SELECT to save the setting.
NOTES:
f The message alert tone beeps only if all the following conditions are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
f To temporarily turn off the message alert tone, see page 79.
On
ECO
Msg alert tone
ECO

AT&T BL102 Specifications

General

Type	Cordless Telephone
DECT 6.0	Yes
Expandable Handsets	Up to 5
Caller ID	Yes
Call Waiting	Yes
Display	Backlit LCD
Speakerphone	Yes
Intercom	Yes
Model Number	BL102
Brand	AT&T
Answering System	Digital
Handsets Included	2
Frequency	1.9 GHz
Range	Up to 1000 feet
Power	AC Adapter
Battery Type	Ni-MH
Battery Life	Up to 7 hours talk time