60
Smart call blocker
Call block settings
Star name list
There are many organizations like schools, medical offices, and
pharmacies that use robocalls to communicate important information
to you. Robocall uses an autodialer to deliver pre-recorded messages. By
entering the name of the organizations into the star name list, it ensures
these calls will ring through when you only know the caller names but not
their numbers.
If the first 15 characters of the incoming caller ID’s name match a name
saved in your star name list, the call will get through and ring. The star
name list stores up to 10 names.
Add a star name entry:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset is not in
use. Press qCID or pDIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press qCID or pDIR to scroll to Star name list, and then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
4. When the screen displays Enter name, use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
appears. The rst character of every word is capitalized.
f Press qCID or pDIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
5. Press MENU/SELECT to store your star name entry. The display shows
Name repeated if the name is already in the star name list. You cannot
save the same name twice.
To Next Page
Loading...
Need help?
General
