AT&T CD4930 - Assign a Speed Dial Number; ID Log; Delete a Speed Dial Number

24
Directory
Assign a speed dial number from the directory or caller ID log
When reviewing directory (page 20) or caller ID log
(page 29), press SPEED DIAL. The screen shows
Assign to speed dial list?. PressPress MENU/SELECT.
Press DIRECTORYp or CALL LOGq to choose your
desired speed dial location (0-9), then press
MENU/SELECT.
-OR-
Use the dialing keys (0-9) to select the desired
speed dial location (0-9).
If the speed dial location is empty, the screen shows
Assigned to speed dial #X (X refers to the speed
dial location).
-OR-
If the speed dial location is occupied, the screen
shows Replace?. Press MENU/SELECT to conrm. The
screen shows Assigned to speed dial #X (X refers to
the speed dial location).
NOTE: You cannot assign a caller ID log entry to speed dial when
the directory is full. You have to delete some directory entries
(page 22) to make room for new assignments.
Delete a speed dial number
Press SPEED DIAL when the telephone is in idle mode.
Press DIRECTORYp or CALL LOGq, or dialing keys (0-9)
to select the desired location, then press DELETE X
to delete the displayed speed dial number. The screen
displays Delete entry? with the name.
Press MENU/SELECT to conrm. There is a There is a
conrmation tone and the screen shows Deleted.
1.
2.
3.
1.
2.
3.
Speed dial
Deleted
Assigned to
speed dial #1
Replace?
Assign to speed
dial list?
Delete entry?
LINDA MILLER
LINDA MILLER
8003604121
p
q
>1:Robert Brown
2:Not assigned
q