Directory
23
Directory operation
Store numbers and names in the directory
Press DIRECTORY. Then press CALL LIST or
CALL LIST to scroll to STORE.
Press OPTIONS, the screen displays ENTER
NUMBER.
Enter the telephone number (up to 24 digits)
you want to store.
-OR-
Press REDIAL to store the last number dialed.
NOTE: If the redialed number is longer than
24 digits, you will hear an error tone if you are
lifting the handset or the speakerphone is
activated while storing the number. The number
cannot be stored.
Press OPTIONS, and the screen displays ENTER
NAME.
Use the characters chart on page 22 to enter a
name (up to 15 characters).
Use CALL LIST to backspace and CALL LIST
to advance or add a space. When you want
to enter two characters in a row that share a
dial pad key (for example M and O), you must
press CALL LIST to move the cursor to the
next position. The screen automatically returns
to idle mode if you do not press a dial pad key
within 15 seconds.
Press OPTIONS to store the name and number.
Store a pause or flash in a directory number
Press CALL LIST twice to store a pause in the
dialing sequence (P displays). Press FLASH to store
a flash in the dialing sequence (F displays).
NOTE: To exit the directory at any time without
saving changes, press CLEAR.
1.
2.
3.
4.
5.
6.
To Next Page
Loading...
Need help?
General
