Telephone operation
11
Handset operation
Making a call
Press PHONE/FLASH or /SPEA�ERSPEA�ER, then enter the telephone number.
Answering a call
Press PHONE/FLASH or /SPEA�ERSPEA�ER.
-OR-
Press any dialing key (0-9, TONE or #).
Ending a call
Press OFF/CANCEL or return the handset to the telephone base or charger.
Temporary ringer silencing
Press OFF/CANCEL or MUTE/DELETE while the telephone is ringing to silence
the ringer temporarily on that handset only. This turns off the ringer without
disconnecting the call. The next incoming call rings normally at the preset volume.
Speakerphone
During a call, press /SPEA�ERSPEA�ER to switch between handsfree speakerphone
and normal handset use. Press OFF/CANCEL to hang up.
NOTE: The speakerphone uses more power than the normal handset. If the handset battery
becomes very low while you are using the speakerphone, the call remains in speakerphone mode
until you hang up or the battery becomes depleted.
Last number redial
Each handset stores the last 10 telephone numbers dialed (up to 30 digits).
Press REDIAL/PAUSE, then pressqCID, pDIR, or REDIAL/PAUSE repeatedly to
view up to 10 recently called numbers. Press PHONE/FLASH or /SPEA�ERSPEA�ER
to dial the displayed number.
Equalizer
The equalizer feature on the handset enables you to change the quality of the
audio to best suit your hearing.
While on a call or intercom call, press EQ to select the equalizer setting
Treble 1, Treble 2, Bass or Natural (the default setting).
•
•
•
To Next Page
Loading...
Need help?
General
