Multiple handset use
15
Intercom
Use the intercom feature for conversations between two handsets. This
feature is only available if you have at least two system handsets. Intercom
is not available for the CL81101 model. You can buy accessory handsets
(AT&T model CL80101) to expand your system.
Use a handset to initiate intercom calls and transfer calls.
1. Press MENU/SELECT in idle mode to enter the main menu. Press qCID or
pDIR to scroll to >Intercom, then press MENU/SELECT. Choose from the
options below.
If you have a two-handset system, your handset screen shows Calling
other handset.
If you have more than two handsets, your screen shows INTERCOM TO:
Press qCID or pDIR to scroll to the desired handset and press
MENU/SELECT. Your handset screen shows Calling HANDSET X or Calling
all handsets.
The other handset(s) rings and shows either Other handset is calling or
HANDSET X is calling (HANDSET represents the handset name, X represents
the handset number).
2. To answer the intercom call, press PHONE/FLASH, /SPEA�ERSPEA�ER or any
dialing key (0-9, TONE , or #) on any called handset.
3. To end the intercom call, one party presses OFF/CANCEL, or places the
handset back in the telephone base or charger. The other party hears 4
beeps. Both handsets display Intercom ended.
•
•
To Next Page
Loading...
Need help?
General
